AC332
£ 0.00 0.0 GBP
FORCE 8 HALF MASK BELT BAG BPT170-011-000

Convenience - Force®8 half-mask always on hand
Clean & Safe - Filters & mask free from dirt & damage when in bag.
Increased lifespan - Product lasts longer when stored safely in belt bag.
RP002
£ 0.00 0.0 GBP
MISTRALE FFP2 X10 MOULDED VALVED MASK

Valved disposable dust mist respirator.
Valved for increased breathing efficiency.
Reduced heat build up.
Twin latex free elastic headbands.
Soft nose bridge.
Externally fitted nose adjustment.
Protects against non-toxic and low to average toxicity solid and liquid aerosols.
Sold in packs of 10.
RP008
£ 0.00 0.0 GBP
Mistral FFP2 Respirator

• FFP2 disposable dust mist respirator
• Soft nose bridge
• Externally fitted nose adjustment for comfortable and efficient seal
• Twin latex free elastic headbands
• Protects against non-toxic and low to average toxicity solid and liquid aerosols
RP012
£ 0.00 0.0 GBP
RP017
£ 0.00 0.0 GBP
FORCE 8 TWIN FILTER CARTRIDGE F8-123 A2P3 (BMP300-011-700)

Cost effective filters for protection against particulates with low profile angle for minimum visual impairment.
Cartridges have an integral maintenance free disposable inhalation valve.
Easy to attach to the respirator with a secure fit when applied.
RP024
£ 0.00 0.0 GBP
RP033
£ 0.00 0.0 GBP
Gas/Vapour GV-X TH2A2P R SL Filter

TH2A2P R SL Spare Filter.
Spare to maintain Jetstream® as a highly effective respiratory product.
RP040
£ 0.00 0.0 GBP
RP045
£ 0.00 0.0 GBP
Qualitative Fit Testing Kit

Full face masks cannot be tested because the test hood is not large enough for the mask fitted with a filter.
For testing this product it will be necessary to use the Quantitative method.
Qualitative Fit Testing can be used not only as a test method to ensure your employees are properly protected; but also as a very effective way of training them in the correct way of fitting a mask.
Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user.
The seal between the face and the edge of the mask is the most common problem area.
RP046
£ 0.00 0.0 GBP
RP057
£ 0.00 0.0 GBP
MISTRALE FFP2V X10 MOULDED CARBON VALVED MASK

Latex free headbands.
Single use for efficiency and hygiene.
Valve avoids build up of heat inside mask.
Activated carbon for additional protection from weld fume.
RP061
£ 0.00 0.0 GBP
RP064
£ 0.00 0.0 GBP
ALPHA SOLWAY QLTK1 QUALITATIVE FACE FIT TEST KIT

• Features Bitrex® bitter tasting sensitivity and fit test solution
• Robust Hood
• Compact, sturdy and portable presentation case
• Complete instructions
• Certificate template
• Spare parts available
• Suitable for Face Fit Testing all Disposable Respirators and Half Mask Respirators fitted with Particulate Filters

Consists of:
• 12 x 2.5ml Bitter Sensitivity Solutions
• 12 x 2.5ml Bitter Test Solutions
• 2 x Nebulisers
RP065
£ 0.00 0.0 GBP
Spare Filter. Spare to maintain Jetstream® as a highly effective respiratory product.
RP070
£ 0.00 0.0 GBP
Force 8 Twin Cartridge Half Face Respirator

• Supplied as mask only (filters not included).
• Fully adjustable 4 point cradle suspension harness.
• Durable thermoplastic rubber mask.
• Reflective strips.
• Low resistance exhalation valve.
• Quick release buckles.

• Conforms to: EN140, EN14387:2004, EN143
RP072
£ 0.00 0.0 GBP
Force 8 Press to Check P3 Filter

• Supplied filter only (Mask not included).
• Daily face-fit reassurance.
• Compatible with Force 8 Mask.
• High efficiency dust protection.
RP073
£ 0.00 0.0 GBP
RP074
£ 0.00 0.0 GBP
Force 8 Twin Filter Cartridge

• F8-713 - ABEK1P3 Combination Cartridge.
• Protects Against Particulates with Low Profile Angle for Maximum Visual Impairment.
• Cartridges have an Integral Maintenance Free Disposable Inhalation Valve.
• Easy to Attach to the Respirator with a Secure Fit when Applied.
RP075
£ 0.00 0.0 GBP
3M 8833 FFP3 CUP SHAPED VALVED DUST MASK (PACK 10)

Tested and approved
Robust outer shell improves collapse resistance
M-Noseclip adjusts easily for fewer pressure points and greater comfort on the nose
The super soft cushioned inner lining helps workers stay comfortable

Conforms to: EN 149:2001 + A1:2009